Jereh Stimulation & Fracturing Services Introduction

Our single or multiple fracturing stimulation uses coiled tubing for wells with multiple or bypassed pay zones. Jereh's Polymer- and solids-free fluids increase effective fracture half-length to maximize fracture conductivity, meanwhile Increase permeability and production cost-effectively. We also offer real-time, on-site, microseismic hydraulic-fracturing monitoring. Operators are developing more difficult-to-access reservoirs and thin formations that were previously uneconomical to produce. Working with collaborator together, Jereh offers innovative, cost-effective fracturing technologies to help achieve this goal.

When surface pumping equipment pump liquid with higher pressure than absorbency capacity of the formation, the pressure nearby the well wall will be increased and exceed the minimum crustal stress and tensile strength, thereby the fracture is created in the formation. As liquid with proppant is injected into the fracture, the fracture is extended far-forth to form certain length, width and height.As a result of high conductivity of created fracture, oil and gas can flow into the well, which has played a role of stimulation.

1.Premium fracturing proppant

Select fracturing fluid technology should consider five factors such as viscosity, liquid friction losses, filtration, flowback and compatibility with reservoir rock and fluid, the other two factors should be taken into account and sources.

2.Optimum design of fractruing

3.Fracturing procedur

a. Separate-layer fracturing
b. high proppant concentration,Sand fallout on the end, refracturing
c. Make use of artificial barrier layer to control fracture height

>> Next page